Yükleniyor…
Waterfalls
IN-WALL WATERFALL — 65x500mm
In-wall waterfall, flush-mounted into the pool wall with the water inlet fed from the rear. Its flush installation gives the pool facade a clean, minimal look. Manufactured in AISI 304 and AISI 316 grades; AISI 316 is recommended for salt or thermal water.
Click to zoom
225 mm65 mm500 mm
Contact us for technical details and pricing.
Product Code: INWWF · Available on Request
Product Information
In-wall waterfall, flush-mounted into the pool wall with the water inlet fed from the rear. Its flush installation gives the pool facade a clean, minimal look. Manufactured in AISI 304 and AISI 316 grades; AISI 316 is recommended for salt or thermal water.
Technical Parameters
INWWFAISI 304
- Dimension A
- 225 mm
- Dimension B
- 65 mm
- Dimension C
- 500 mm
- Connection Diameter
- Ø50 mm
- Recommended Pump Flow Rate
- 15 m³/h
- Water Inlet
- From the rear
- Surface
- Matte
- Mounting Type
- Flush-mounted in wall
- Durability
- Grounding required; chlorine-resistant
INWWF-316AISI 316
- Dimension A
- 225 mm
- Dimension B
- 65 mm
- Dimension C
- 500 mm
- Connection Diameter
- Ø50 mm
- Recommended Pump Flow Rate
- 15 m³/h
- Water Inlet
- From the rear
- Surface
- Matte
- Mounting Type
- Flush-mounted in wall
- Durability
- Grounding required; resistant to salt and thermal water
Technical Parameters
| Code | INWWF | INWWF-316 |
| Grade | AISI 304 | AISI 316 |
| Dimension A | 225 mm | 225 mm |
| Dimension B | 65 mm | 65 mm |
| Dimension C | 500 mm | 500 mm |
| Connection Diameter | Ø50 mm | Ø50 mm |
| Recommended Pump Flow Rate | 15 m³/h | 15 m³/h |
| Water Inlet | From the rear | From the rear |
| Surface | Matte | Matte |
| Mounting Type | Flush-mounted in wall | Flush-mounted in wall |
| Durability | Grounding required; chlorine-resistant | Grounding required; resistant to salt and thermal water |
Usage & Care Notes
- If the water you use is thermal or salt water, choose an AISI 316-grade or 316-titanium-alloy stainless product.
- All products must be grounded by authorized personnel.
- Polished-surface products should be cleaned more frequently than matte products to preserve their appearance.
- Before first use, clean the product with a Scotch-Brite pad or similar material; this removes any rust effect caused by iron dust picked up during transport.
- If the product appears rusted, first check that your pool water does not contain iron.
- For products affected by iron dust, authorized personnel should apply PELOX solution while wearing gloves, goggles and a mask, rinse thoroughly with water, and restore the original finish with suitable polishing materials.
- Operate at the recommended pump power for maximum efficiency, and have all connections made by an authorized service provider.
- When ordering, specify whether the water inlet should be plain, sleeved or nippled.
Technical Drawing Downloads
Related Products
Often Bought With IN-WALL WATERFALL — 65x500mm
Get a quote for IN-WALL WATERFALL — 65x500mm
Contact us for technical details, dimensions and pricing — we respond within 24 hours.
AISI 304/316 StainlessIP68 CertifiedCE Compliant
Why SNY Pool?
Custom Manufacturing
Custom production options tailored to your dimensions and technical specifications.
Fast Delivery
Fast shipping on in-stock items, with a planned production schedule for custom projects.
Certified Materials
AISI 304/316 stainless steel, manufactured to IP68 and CE standards.
Technical Support
Engineering and technical consultancy from the project stage through to installation.